 |
Product purpose
This non-inactivated virus sampling tube for mixed sample detection, which is registered under Class I category uses the reagent with the same formulation as that of the tube registered under Class II category, suitable for large-scale screening in areas with low risks of infection in respiratory diseases.
Virus sampling kit
| Product type | Product name | Item No. | Reagent volume | Product specification | Tube specification | Swab quantity | ||||||
Non-inactivated | Virus sampling kit | MT0901-3-3.5 | 3.5mL | 50 tubes/carton | φ16×100mm | Five independent flocked swabs | ||||||
Virus sampling kit | MT0901-3-6 | 6mL | 50 tubes/carton | φ16×100mm | Ten independent flocked swabs | |||||||
Virus sampling kit | MT0901-4 | 10mL | 20 tubes/carton | φ29×120mm | Ten independent flocked swabs | |||||||
Disposable sampler
Model | Material | Sampling site | Break point | Product specification |
BZ0302-1 | Flocked/nylon | Nasopharyngeal swab | 8 cm break point | 1000 swabs/box |
BZ0304 | Flocked/nylon | Oropharyngeal swab | 7 cm break point | |
BZ0304-1 | Flocked/nylon | Oropharyngeal swab | 3 cm break point |
Excellent product performance | Elution beads added to promote sample release |
The virus sampling kit has a lower Ct value than Hanks solution at any virus concentration, when stored at low-temperature or ambient temperature. | The elution beads are added to the reagent to promote sample release. |
Higher positive virus isolation rate | Transport stability guaranteed |
The virus can be isolated stably within 48 hours by using the virus sampling kit at 2-8 ℃ or room temperature. | The tube dies are independently developed through cooperation with structural experts to prevent sample leakage and guarantee transport stability. |
Safe and residue-free by continuous sterilization by irradiation | Product formulation designed to eliminate contamination |
The expensive sterilization by irradiation is used to guarantee the safety of operators with sterilization integrity. | With a 15-year history of proven manufacturing processes and Class 10,000 clean production environment, YOCON offers you sampling products with a sterility assurance level of 10e-6. |
High-quality flocked swabs
YOCON sampling swabs have been structurally studied to ensure the proper arrangement of flock for maximum adsorption and release of samples.
Product purpose
This non-inactivated virus sampling tube for mixed sample detection, which is registered under Class I category uses the reagent with the same formulation as that of the tube registered under Class II category, suitable for large-scale screening in areas with low risks of infection in respiratory diseases.
Virus sampling kit
| Product type | Product name | Item No. | Reagent volume | Product specification | Tube specification | Swab quantity | ||||||
Non-inactivated | Virus sampling kit | MT0901-3-3.5 | 3.5mL | 50 tubes/carton | φ16×100mm | Five independent flocked swabs | ||||||
Virus sampling kit | MT0901-3-6 | 6mL | 50 tubes/carton | φ16×100mm | Ten independent flocked swabs | |||||||
Virus sampling kit | MT0901-4 | 10mL | 20 tubes/carton | φ29×120mm | Ten independent flocked swabs | |||||||
Disposable sampler
Model | Material | Sampling site | Break point | Product specification |
BZ0302-1 | Flocked/nylon | Nasopharyngeal swab | 8 cm break point | 1000 swabs/box |
BZ0304 | Flocked/nylon | Oropharyngeal swab | 7 cm break point | |
BZ0304-1 | Flocked/nylon | Oropharyngeal swab | 3 cm break point |
Excellent product performance | Elution beads added to promote sample release |
The virus sampling kit has a lower Ct value than Hanks solution at any virus concentration, when stored at low-temperature or ambient temperature. | The elution beads are added to the reagent to promote sample release. |
Higher positive virus isolation rate | Transport stability guaranteed |
The virus can be isolated stably within 48 hours by using the virus sampling kit at 2-8 ℃ or room temperature. | The tube dies are independently developed through cooperation with structural experts to prevent sample leakage and guarantee transport stability. |
Safe and residue-free by continuous sterilization by irradiation | Product formulation designed to eliminate contamination |
The expensive sterilization by irradiation is used to guarantee the safety of operators with sterilization integrity. | With a 15-year history of proven manufacturing processes and Class 10,000 clean production environment, YOCON offers you sampling products with a sterility assurance level of 10e-6. |
High-quality flocked swabs
YOCON sampling swabs have been structurally studied to ensure the proper arrangement of flock for maximum adsorption and release of samples.
